Filter
Top Products
English
280-8180-00
DXZ958RMC 47
Common Operations
Setting the dimmer level
(DMR LEVEL)
This function allows you to set how much the
displayed is to be dimmed.
• The factory default setting is “3”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [APPEARANCE].
3. Touch
on the left of the display to
select “DMR LEVEL”.
RTN
DMR LEVEL 3
ADJ
APPEARANCE
4. Touch
on the right of the display to
set the dimmer level.
∗ Select one of OFF (dimming OFF, bright),
1 (slightly dimmed) to 5 (dark).
5. Press the [ADJ] button to return to the
original mode.
Adjusting the brightness of
the display (BRIGHT)
You can adjust the brightness of the display to
match the mounting angle of the unit.
• The factory default setting is “5”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [APPEARANCE].
3. Touch
on the left of the display to
select “BRIGHT”.
RTN
BRIGHT
5
ADJ
APPEARANCE
4. Touch
on the right of the display to
adjust the brightness.
∗ This setting item can be adjusted within
the range 1 to 12.
Adjust this setting item while viewing how
the appearance of the display changes.
5. Press the [ADJ] button to return to the
original mode.
Making the LED blink when
DCP is removed (BLINK LED)
You can make the LED on this unit blink when
the DCP is removed.
• The factory default setting is “OFF”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [APPEARANCE].
3. Touch
on the left of the display to
select “BLINK LED”.
RTN
BL INK LED
OFF
ADJ
APPEARANCE
4. Touch
on the right of the display to
select “ON” or “OFF”.
5. Press the [ADJ] button to return to the
original mode.
Setting the beep for when
buttons are operated (BEEP)
The short or long high-pitched tone you hear
when a button is operated is called a “BEEP”.
• The factory default setting is “ON”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [APPEARANCE].
3. Touch
on the left of the display to
select “BEEP”.
RTN
BEEP
OFF
ADJ
APPEARANCE
4. Touch on the right of the display to
select “ON” or “OFF”.
5. Press the [ADJ] button to return to the
original mode.
+DXZ958RMC_01-32-Eng.p65 05.1.20, 19:5247