Filter
Top Products
English
280-8180-00
DXZ958RMC 51
Common Operations
Performing a system check
(SYSTEM CHECK)
This function allows you to perform a system
check when an external equipment is connected
to this unit or the “SPEAKER SELECT” is
changed.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [SETTING].
3. Touch
on the left of the display to
select “SYSTEM CHECK”.
RTN
SYSTEM
CHECK
[
START
]
ADJ
SETTING
4. Touch [START].
The confirmation display appears.
5. Touch [OK].
ADJ SETTING
OK
CANCEL
When the system check is complete,
“SPEAKER SELECT” screen appears.
Select the speaker system. For details on
the speaker system, see “Selecting a
speaker system” (cf. page 14). After this
operation, the display returns to the original
mode.
Using the security function
(CODEMATIC)
This function prevents persons who do not know
the touch sequence from easily operating this
unit. The Touch Code display appears when
DCP is attached and the power is turned ON
with “CODEMATIC” set to “ON”.
If you touch the display in this screen in the
preset order, “SUCCESSFUL” is displayed and
the power is turned OFF.
When the power is next turned ON, the Touch
Code display does not appear, and the main
display in the radio mode or CD mode is
displayed.
• The factory default setting is “OFF”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [SETTING].
3. Touch
on the left of the display to
select “CODEMATIC”.
RTN
CODEMATIC
OFF
ADJ
SETTING
2 types of items are displayed for
“CODEMATIC”, items for which “ON” or
“OFF” is displayed at the right of the screen,
and items for which “INPUT” is displayed at
the right of the screen. Here, select the item
for which “ON” or “OFF” is displayed at the
right of the display.
4. Touch
on the right of the display to
select “ON” or “OFF”.
5. Touch
on the left of the display to
select “CODEMATIC”.
CODEMATIC
RTN
ADJ SETTING
INPUT
Here, select the item for which “INPUT” is
displayed at the right of the display.
6. Touch [INPUT].
The Touch Code display appears.
7. Enter the touch code.
∗ Touch [1] to [4] at the bottom of the display
at random. You can also repeatedly touch
the same number.
CODE MATIC
1234
When you touch 4 times, and 4 indicators
light, you will hear a long beep, and the
original mode is returned to.
■ To cancel CODEMATIC
If you have forgotten the touch order, either
touch [4], [1], [3] and then [2] in that order, or
press [SCN] on the remote control unit.
+DXZ958RMC_01-32-Eng.p65 05.1.20, 19:5251