Filter
Top Products
5. Embedded PC
WARNING: Th e Play PC is always used as default. If the Play PC does not exist or has been damaged, the
DMP-100 processor will automatically use the em bedd ed PC as a back up solution. If the play PC has been
damaged, a notification will be given b y the used control software.
If the Play P C is n ot used, d ata can be provided t o the emb edded PC by using the 4G B CF card installed inside
the DMP-100 processor. Content can be put on the CF card by connecting a USB device to the DMP-100 or by
connecting by remote control (TCP/IP connection).
5.2 Embedded PC operating system, settings
What should be done ?
During installation there are sev eral settings which must be verified and set in the embedded PC operating system. F ailure to set
some of these c an lead to loss of data or incorrect calculations of time based functions.
Set the display resolution
1. Right click on the desktop to open the context menu.
Image 5-2
2. Select Properties.
The Properties window opens.
3. Click on Settings tab.
4. Adjust the resolution of the primary di
splay.
Note: By default, the secondary display is set to 1024x768 and should normally not be adjusted. There are restrictions of
supported resolutions of the secondary adapter since it is use d as a backup input for the DM P-100.
5. Click OK.
Configure the time zone, date, and time
1. Double click the time in the system tray.
18
R59770263 DMP-100 15/09/2011