Filter
Top Products
2. Introduction
2.4 Technical summary
Summary
Type Value
Input
DVI input (suppo rted res olutions 800x 600 / 1024x768 / 1600x1200)
Compatibility Barco DVI based LED w alls, S10XP FX or newer (Barco NNI tiles are not supported)
Output DVI-A, Barco LED protocol. (supported resolutions 800x600@60HZ / 1024x768@50HZ )
Scaler Default set to cropping but scaling is possible.
Z-order control Not available.
Window positioning
Intuitive positioning interface.
Connectors RS 232 [RJ 11] — Ethernet [RJ 45].
Memory
1GB RAM.
4GB internal CF card.
Effects Contrast, brightness and sharpness adjustment.
Ruggedness IP10
Dimensions
Without screw pillar: 230 x 262.4 x 56 (W x D x H)
With screw pillar: 247.4 x 262.4 x 56 (W x D x H)
Weight
±2.8 Kg (without pac kage)
Operating temperatures 0 ºC <> 50 ºC
Power consumption 50 W.
Stacking
No stacking possible.
Chaining
No chaining possible.
Control software RMS-1 (provided by Barco). Note: DMP-100 is not supported by Director Toolset
R59770263 DMP-100 15/09/2011 7