38-91
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Software Configuration Guide
OL-12189-01
Chapter 38 Configuring IP Unicast Routing
Configuring Protocol-Independent Features
Step 5
match ip address {access-list-number |
access-list-name} [...access-list-number |
...access-list-name]
Match a standard access list by specifying the name or
number. It can be an integer from 1 to 199.
Step 6
match metric metric-value Match the specified route metric. The metric-value can be
an EIGRP metric with a specified value from 0
to 4294967295.
Step 7
match ip next-hop {access-list-number |
access-list-name} [...access-list-number |
...access-list-name]
Match a next-hop router address passed by one of the
access lists specified (numbered from 1 to 199).
Step 8
match tag tag value [...tag-value] Match the specified tag value in a list of one or more route
tag values. Each can be an integer from 0 to 4294967295.
Step 9
match interface type number [...type number] Match the specified next-hop route out one of the
specified interfaces.
Step 10
match ip route-source {access-list-number |
access-list-name} [...access-list-number |
...access-list-name]
Match the address specified by the specified advertised
access lists.
Step 11
match route-type {local | internal | external [type-1 |
type-2]}
Match the specified route-type only on a Catalyst Switch
Module 3110:
• local—Locally generated BGP routes.
• internal—OSPF intra-area and interarea routes or
EIGRP internal routes.
• external—OSPF external routes (Type 1 or Type 2)
or EIGRP external routes.
Step 12
set dampening halflife reuse suppress
max-suppress-time
Set BGP route dampening factors only on a Catalyst
Switch Module 3110.
Step 13
set local-preference value Assign a value to a local BGP path only on a Catalyst
Switch Module 3110.
Step 14
set origin {igp | egp as | incomplete} Set the BGP origin code only on a Catalyst Switch
Module 3110.
Step 15
set as-path {tag | prepend as-path-string} Modify the BGP autonomous system path only on a
Catalyst Switch Module 3110.
Step 16
set level {level-1 | level-2 | level-1-2 | stub-area |
backbone}
Set the level for routes that are advertised into the
specified area of the routing domain. The stub-area and
backbone are OSPF NSSA and backbone areas.
Step 17
set metric metric value Set the metric value to give the redistributed routes (only
for EIGRP) only on a Catalyst Switch Module 3110. The
metric value is an integer from –294967295 to
294967295.
Command Purpose
