Index
IN-19
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Software Configuration Guide
OL-12189-01
interfaces (continued)
naming 10-20
physical, identifying 10-7
range of 10-9
restarting 10-25
shutting down 10-25
speed and duplex, configuring 10-17
status 10-24
supported 10-7
types of 10-1
interfaces range macro command 10-10
interface types 10-7
Interior Gateway Protocol
See IGP
internal BGP
See IBGP
internal neighbors, BGP 38-53
Internet Control Message Protocol
See ICMP
Internet Group Management Protocol
See IGMP
Internet Protocol version 6
See IPv6
Inter-Switch Link
See ISL
inter-VLAN routing 1-12, 38-3
Intrusion Detection System
See IDS appliances
inventory management TLV 27-6
IP ACLs
for QoS classification 36-7
implicit deny 34-10, 34-14
implicit masks 34-10
named 34-15
undefined 34-21
IP addresses
128-bit 39-3
classes of 38-8
default configuration 38-7
discovering 6-26
for IP routing 38-6
IPv6 39-3
MAC address association 38-10
monitoring 38-19
IP base feature set 1-2
IP broadcast address 38-17
ip cef distributed command 38-86
IP directed broadcasts 38-16
ip igmp profile command 23-25
IP information
assigned
manually 3-14
through DHCP-based autoconfiguration 3-3
default configuration 3-3
IP multicast routing
addresses
all-hosts 44-3
all-multicast-routers 44-3
host group address range 44-3
administratively-scoped boundaries, described 44-37
and IGMP snooping 23-2
Auto-RP
adding to an existing sparse-mode cloud 44-18
benefits of 44-17
clearing the cache 44-53
configuration guidelines 44-12
filtering incoming RP announcement
messages
44-19
overview 44-7
preventing candidate RP spoofing 44-19
preventing join messages to false RPs 44-19
setting up in a new internetwork 44-17
using with BSR 44-25
