Index
IN-14
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Software Configuration Guide
OL-12189-01
Ethernet VLANs
adding 12-9
defaults and ranges 12-8
modifying 12-9
EUI 39-4
events, RMON 30-3
examples
network configuration 1-16
expedite queue for QoS 36-76
Express Setup 1-3
See also getting started guide
extended crashinfo file 47-20
extended-range VLANs
configuration guidelines 12-13
configuring 12-12
creating 12-14
creating with an internal VLAN ID 12-15
defined 12-1
extended system ID
MSTP 18-18
STP 17-4, 17-16
extended universal identifier
See EUI
Extensible Authentication Protocol over LAN 9-1
external BGP
See EBGP
external neighbors, BGP 38-53
F
Fa0 port
See Ethernet management port, internal
failover support 1-7
fallback bridging
and protected ports 46-4
bridge groups
creating 46-4
described 46-2
displaying 46-11
function of 46-2
number supported 46-5
removing 46-5
bridge table
clearing 46-11
displaying 46-11
configuration guidelines 46-4
connecting interfaces with 10-7
default configuration 46-4
described 46-1
frame forwarding
flooding packets 46-2
forwarding packets 46-2
overview 46-1
protocol, unsupported 46-4
stack changes, effects of 46-3
STP
disabling on an interface 46-10
forward-delay interval 46-9
hello BPDU interval 46-8
interface priority 46-7
keepalive messages 17-2
maximum-idle interval 46-9
path cost 46-7
VLAN-bridge spanning-tree priority 46-6
VLAN-bridge STP 46-2
support for 1-12
SVIs and routed ports 46-1
unsupported protocols 46-4
VLAN-bridge STP 17-11
