Index
IN-44
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Software Configuration Guide
OL-12189-01
standby links 20-2
standby router 40-1
standby timers, HSRP 40-10
startup configuration
booting
manually 3-19
specific image 3-20
clearing B-20
configuration file
automatically downloading 3-18
specifying the filename 3-18
default boot configuration 3-18
stateless autoconfiguration 39-6
static access ports
assigning to VLAN 12-11
defined 10-3, 12-3
static addresses
See addresses
static IP routing 1-12
static MAC addressing 1-9
static routes
configuring 38-88
configuring for IPv6 39-21
static routing 38-4
static VLAN membership 12-2
statistics
CDP 26-5
IEEE 802.1x 9-45
interface 10-24
IP multicast routing 44-53
LLDP 27-7
LLDP-MED 27-7
OSPF 38-40
QoS ingress and egress 36-78
RMON group Ethernet 30-5
RMON group history 30-5
SNMP input and output 32-17
VTP 13-16
sticky learning 25-8
storm control
configuring 25-3
described 25-1
disabling 25-5
displaying 25-18
support for 1-4
thresholds 25-1
STP
accelerating root port selection 19-4
BackboneFast
described 19-7
disabling 19-17
enabling 19-16
BPDU filtering
described 19-3
disabling 19-15
enabling 19-14
BPDU guard
described 19-2
disabling 19-14
enabling 19-13
BPDU message exchange 17-3
configuration guidelines 17-13, 19-12
configuring
forward-delay time 17-23
hello time 17-22
maximum aging time 17-23
path cost 17-20
port priority 17-18
root switch 17-16
secondary root switch 17-18
spanning-tree mode 17-15
switch priority 17-21
transmit hold-count 17-24
counters, clearing 17-24
cross-stack UplinkFast
described 19-5
enabling 19-16
default configuration 17-13
