Index
IN-9
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Software Configuration Guide
OL-12189-01
default configuration (continued)
system name and prompt 6-15
TACACS+ 7-13
UDLD 28-4
VLAN, Layer 2 Ethernet interfaces 12-20
VLANs 12-8
VMPS 12-30
voice VLAN 14-3
VTP 13-7
WCCP 43-5
default gateway 3-14, 38-13
default networks 38-89
default routes 38-89
default routing 38-4
deleting VLANs 12-10
denial-of-service attack 25-1
description command 10-20
designing your network, examples 1-16
desktop template 5-11
destination addresses
in IPv4 ACLs 34-12
in IPv6 ACLs 35-6
destination-IP address-based forwarding,
EtherChannel
37-8
destination-MAC address forwarding, EtherChannel 37-8
detecting indirect link failures, STP 19-8
device discovery protocol 26-1, 27-1
device manager
benefits 1-3
described 1-3, 1-5
in-band management 1-6
DHCP
Cisco IOS server database
configuring 21-14
default configuration 21-9
described 21-6
enabling
relay agent 21-11
server 21-10
DHCP-based autoconfiguration
client request message exchange 3-4
configuring
client side 3-4
DNS 3-6
relay device 3-7
server side 3-5
server-side 21-10
TFTP server 3-6
example 3-8
lease options
for IP address information 3-5
for receiving the configuration file 3-5
overview 3-3
relationship to BOOTP 3-4
relay support 1-6, 1-12
support for 1-6
DHCP-based autoconfiguration and image update
configuring 3-11 to 3-14
understanding 3-10
DHCP binding database
See DHCP snooping binding database
DHCP binding table
See DHCP snooping binding database
DHCP option 82
circuit ID suboption 21-5
configuration guidelines 21-9
default configuration 21-8
displaying 21-15
forwarding address, specifying 21-11
helper address 21-11
overview 21-3
packet format, suboption
circuit ID 21-5
remote ID 21-5
remote ID suboption 21-5
