Index
IN-27
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter Software Configuration Guide
OL-12189-01
MSDP (continued)
join latency, defined 45-6
meshed groups
configuring 45-15
defined 45-15
originating address, changing 45-17
overview 45-1
peer-RPF flooding 45-2
peers
configuring a default 45-4
monitoring 45-18
peering relationship, overview 45-1
requesting source information from 45-8
shutting down 45-15
source-active messages
caching 45-6
clearing cache entries 45-18
defined 45-2
filtering from a peer 45-10
filtering incoming 45-14
filtering to a peer 45-12
limiting data with TTL 45-13
monitoring 45-18
restricting advertised sources 45-9
support for 1-12
MSTP
boundary ports
configuration guidelines 18-16
described 18-6
BPDU filtering
described 19-3
enabling 19-14
BPDU guard
described 19-2
enabling 19-13
CIST, described 18-3
CIST regional root 18-3
CIST root 18-5
configuration guidelines 18-15, 19-12
MSTP (continued)
configuring
forward-delay time 18-23
hello time 18-22
link type for rapid convergence 18-24
maximum aging time 18-24
maximum hop count 18-24
MST region 18-16
neighbor type 18-25
path cost 18-21
port priority 18-20
root switch 18-17
secondary root switch 18-19
switch priority 18-22
CST
defined 18-3
operations between regions 18-4
default configuration 18-15
default optional feature configuration 19-12
displaying status 18-26
enabling the mode 18-16
EtherChannel guard
described 19-10
enabling 19-17
extended system ID
effects on root switch 18-18
effects on secondary root switch 18-19
unexpected behavior 18-18
IEEE 802.1s
implementation 18-6
port role naming change 18-7
terminology 18-5
instances supported 17-10
interface state, blocking to forwarding 19-2
interoperability and compatibility among
modes
17-11
interoperability with IEEE 802.1D
described 18-9
restarting migration process 18-26
