Filter
Top Products
TASCAM HD-P2 Owner's Manual 9
Figure 3 -
Audio Switches
Located on top of the HD-P2, next to
the data wheel are switches for con-
trolling the analog audio inputs and
dynamics.
The input switches (
LINE/MIC
) switch
between the XLR and RCA jack
inputs. The
PAD
switches only apply to
signals coming in the XLR jacks.
Limiting can be turned on or off and
the
STEREO
LINK
switch enables stereo
limiting of the left & right channels.
When
STEREO LINK
is disabled, each
channel has its own mono limiter.
Audio Switches
PHANTOM
can be turned on to provide 48V phantom
power to the microphone inputs.
MIC
controls whether the left mic input is from the
internal microphone or from the normal input source.
Turning on
LOW CUT
provides a -18dB/oct, 100Hz low-
cut filter to the analog inputs.
WARNING
Microphones should not be connected to or
disconnected from the HD-P2 with phantom
power switched on.
Unbalanced dynamic microphones should never
be connected to phantom-powered connectors.
Audio Switches, Inputs & Outputs
Left Side
KEYBOARD
– Accepts standard PS/2 keyboard. An
external keyboard is useful for quickly renaming
files and markers as well as remotely operating the
transport.
FireWire
– Connects the HD-P2 to a host computer via
IEEE.1394 (Windows/Macintosh). When connected
to a powered FireWire host the HD-P2 will auto
-
matically use that for power, extending battery life.
TIMECODE IN
– Standard female XLR input for linear
timecode.
CLOCK IN/VIDEO REF
– Word Clock/Video Input connec-
tor: BNC (75 ohm) internal termination for 5V TTL
word clock or 1.0Vpp composite, blackburst, or tri-
level video sync.
DIGITAL IN
– S/PDIF audio input RCA Jack.
DIGITAL OUT
– S/PDIF audio output RCA Jack.
PHONES
– Standard 1/4 inch headset jack. Project set-
tings control the type of headset monitoring (stereo,
mono).
Figure 4 - Left Side Connectors
Right Side
LINE OUT L/R
– RCA output jacks for analog output.
LINE IN L/R
– RCA input jacks for analog input.
DC IN
– 12VDC input jack for use with the provided AC
adaptor.
MIC/LINE
– XLR input jacks for either line level or mic
level (selected by switch on top) input. A separate
switch controls phantom power to the XLR inputs.
Compact Flash Slot
– Type I/II Compact Flash slot
(top left). Unmount Compact Flash (via menus) BE
-
FORE removing card to ensure file integrity.
Figure 5 - Right Side Connectors