Filter
Top Products
TASCAM HD-P2 Owner's Manual 27
Specifications
Specifications
Recording Media: Compact Flash, Microdrive
File Format: BWF Broadcast Wave File (FAT16/FAT32)
Recording time: 24 minutes (256 MB Compact Flash, Fs=44.1 kHz
16 bit stereo)
Operating time: 5 Hours
Sample Rates: 44.1/48/88.2/96/176.4/192 kHz
Sample Clock refs: S/PDIF, Video (NTSC or PAL), LTC, WORD
Quantization: 16/24 bit
Pre-record buffer: Up to 10 seconds
Time code types: 23.976,24,25,29,29.97 DF/NDF, 30 DF/NDF
Frequency response
Nominal level: 20 Hz to 20 kHz ±1.0 dB (44.1 kHz/48 kHz)
MIC to LINE OUT: 20 to 40 kHz 0.5 dB/–
4.0 dB (88.2 kHz/96 kHz)
20 to 80 kHz 0.5 dB/–20 dB (176.4 kHz/192 kHz)
Noise level Trim Max (22 Hz to 22 kHz): Up to –55 dBu
MIC to LINE OUT
THD+N
MAX LEVEL at 1 kHz: Up to 0.01% MIC to Line Out
TRIM MIN: Up to 0.01% 22 kLPF
Crosstalk at 1
kHz: Over 80 dB MIC to Monitor Out
Delay: 44.1 kHz 1.5 msec
192 kHz 0.7 mesc
Limiter: Attach time Up to 25 usec
Release time Up to 50
msec
Low Cut: High pass 100 Hz cut off –18 dB/OCT
Phantom Power: +48 Volt, 10 mA
Input/Output Connectors
Analog I/O
MIC Input
Connector: XLR–3–31 type
Input Impedance: 1.3 k
¸
Balance
Mic Input Level: –60 dBu (Trim Max) to 13.8 dBu (Trim Min)
Internal Mic level: –60 dBu (Trim Max) to 13.8 dBu (Trim Min)
Headroom: 16dB/22
dB (with limiter)
Maximum Gain: 46.2 dB
Pad: 20 dBS
LINE Input
Connector: RCA Pin type
Input Impedance:10 k
¸
Input Level: –46.2 dBV (Trim Max) to 0 dBu (Trim Min)
Headroom: 16
dB
Maximum Gain: 46.2 dB
LINE Output
Connector: RCA Pin type
Input Impedance: 100
¸
Input Level: –10 dBV
Head Room: +6 dBV
Headphone Output
Connector: 6 TRS PHONE jack (Tip: L, Ring: R, Sleeve: GND)
Output Power: 55 mW+55 mW (32
¸
)
Speaker Output:
500 mW (16
¸
)
Digital I/O
COAXIAL INPUT/OUTPUT
Connector: RCA Pin type
Input Impedance: 75
¸
Format: IEC60958 (S/PDIF)
Quantization: 24 bit
Other Inputs
LTC INPUT
Connector: XLR–3–31
Input Impedance: 75
¸
VIDEO INPUT
Connector: BNC
Input Impedance: 75
¸
KEYBOARD
Connector: PS/2
FIREWIRE
Connector: IEEE.1394 (6 Pin)
Format: IEEE.1394 (Asynchoronous)
Baud Rate: 400 Mbps
Display
LCD: 240x160 dots with backlight
Power
AC ADAPTOR
Input: USA/Canada 120 V AC, 60 Hz
Europe/U.K. 230 V AC, 50 Hz
Australia 240 V AC, 50 Hz
Output: DC12 V
Rash Current: 600
mA
Power Consumption: 6 W (CompactFlash)
Battery
8 x AA type dry cell (NiMH recommended)
Operating temperature: 0° to 35° C
Dimensions (w x d x h): 245 x 188 x 60
Weight: 1.2 kg (without the batteries)
Compatible Operating Systems:
Windows XP and Macintosh OSX ~10.3