Filter
Top Products
35
Adjusting the sound characteristics
(BAS/TRE/BAL/FAD/SUB)
In addition to the functions described in the preceding
sections, this unit allows adjusting the following items.
BAS (Bass): Bass level
TRE (Treble): Treble level
BAL (Balance): Left/right speaker balance (output in opposite
channel is attenuated)
FAD (Fader): Front/rear speaker balance (output in opposite
channel is attenuated)
SUB (Subwoofer): Subwoofer output level
The adjustment procedure is the same for every item. The
example below is for adjusting the balance.
Adjusting the balance
1
Play back the source (CD, MD, radio, etc.).
2
Press SOUND and select “BAL”.
BAL
LR
3
Within 3 seconds, press B or b to make the
adjustment.
Quickly attenuating the sound
Press the ATT button.
“ATT••on” is shown, and the volume is attenuated.
While attenuation is on, an icon is shown at the bottom of
the monitor screen, or the indication “ATT” is shown on
the display window.
To restore the original volume, press ATT again or press
VOL +. “ATT••off” is shown, and the volume is restored.
Source Sound Memory
This unit automatically memorizes the DSO and equalizer
settings separately for each source (FM, AM, CD, MD/MS,
TV, VIDEO). This feature is called Source Sound Memory. It
lets you listen to each source with optimized settings.
ATT
SOUND
B/b
Tip
When no button is operated for about 3
seconds, the regular display appears
again.
Tip
When the interface cable of a car
telephone is connected to the ATT lead,
the unit decreases the volume
automatically when a telephone call
comes in (Telephone ATT function).