Filter
Top Products
18
FM/AM Reception
To listen to stored stations
In radio reception, press the number buttons
or V and v to select the desired station.
When you cannot receive stored
stations, such as when driving in a
different area
Lightly press B or b. The unit automatically
searches for a station and stops when one is
found. Continue this process until you have
found a station you want to listen to.
If the station search stops very often, you can
restrict the search to strong stations only, by
selecting the local mode as follows.
Follow the steps below with the card remote
commander while the monitor is open.
1
Press MENU in radio reception.
2
Press V or v to select “Local Seek”.
3
Press b to select “on”, and press
ENTER.
You can now search for local stations by
lightly pressing B or b.
To return to normal reception
Select “off” in step 3.
When there is noise during stereo
reception
Selecting mono reception as follows may
improve the sound.
Follow the steps below with the card remote
commander while the monitor is open.
1
Press MENU in FM radio reception.
2
Press V or v to select “Mono”.
3
Press b to select “on”, and press
ENTER.
To return to normal reception
Select “off” in step 3.
Automatically adjusting reception
bandwidth (IF Auto mode)
When reception conditions deteriorate while
listening to a stereo broadcast, automatic
bandwidth limiting may result in a switch to
mono. You can enable stereo reception also
under such conditions.
Follow the steps below with the card remote
commander while the monitor is open.
1
Press MENU in FM radio reception.
2
Press the V or v to select “IF”.
3
Press b to select “Wide”, and press
ENTER.
Note
When “IF Auto” is set to “Wide”, there may be increased
noise during reception.