Filter
Top Products
23
Reading the monitor and display
window
Information on the selected source is shown on the monitor
or display window (when monitor is closed).
Monitor indication during CD playback
CD1 DI SC
RTACK
Name
New
Age
Disc
10:30
REP LOUD
DSO EQ7
1225.4
1
5
6
7
23 4
8
1 Source type and changer number
2 Disc number
3 Track number
4 Play time
5 Disc name*
1
*
2
6 Pictograms*
3
*
4
Various settings are shown as pictograms.
Example)
: Track
: Album
: Disc
: Changer
7 Graphics display
Normally, the current settings for DSO (page 32) and EQ7
(page 33) are shown here.
Pressing LIST on the card remote commander brings up a list
of disc names (page 29).
While setting the equalizer curve, the graphic equalizer is
shown (page 33).
8 Clock indication
When “Dual Information” is set to “on”, the time is also
shown (page 39).
Standby mode
When the unit is in standby mode with
only the clock indication shown, pressing
SOURCE shows the selected source on
the monitor or the display window.
CD/MD/”MG Memory Stick” Playback
continue to next page t
*1 When pressing DSPL, “NO Disc
Name”, “NO Album Name”, “NO
Track Name”, or “NO ID3 Tag”
indicates that there is no disc name,
album name, track name, or ID3 tag.
*2 Labeling a CD (page 27).
*3 “LP2” or “LP4” is displayed only
when an optional MD unit with the
MDLP function is connected, and an
MDLP disc is played.
*4 “MP3” is displayed only when an
optional MP3 compatible CD unit is
connected, and an MP3 file is played.
Notes
• Some characters cannot be displayed.
Characters and signs which cannot be
displayed appear as “*”.
• For some CD TEXT discs with very
many characters, information may not
scroll. Or information may not be
displayed.
• This unit cannot display the artist
name for each track of a CD TEXT disc
or an album.
Tip
When Auto Scroll is set to off, and the
disc/track/album is changed, the disc/
track/album name does not scroll.
Preparation: To listen CDs, MDs, or “MG
Memory Sticks” on this unit, an optional
Sony CD/MD changer and/or MG
memory stick system-up unit must be
connected to the connection box.