Filter
Top Products
30
Storing channels
Follow the steps below with the card remote commander
while the monitor is open.
1
Press SOURCE to select “TV” or “VIDEO”.
When “VIDEO” is displayed, go to step 2.
2
Press MODE to switch between “TV1” and
“TV2”.
3
Press MENU.
4
Press V or v to select “Auto Memory”.
Au t o Memo r y
5
Press ENTER.
“Auto Memory” flashes, and strong stations are memorized
in the order of their frequency.
When the storing process is completed, the regular display
appears again.
TV operation
Selection/search Operation steps
Press SOURCE to select “TV” or “VIDEO”. Press
MODE to select “TV1” or “TV2”. Press number
buttons 1 - 6 or V and v.
1 Press SOURCE to select “TV” or “VIDEO”.
2 Press MODE to switch between “TV1” and
“TV2”.
3 Proceed steps 3 and 4 of “Storing stations
manually” (page 19).
Proceed steps described in “Assigning a name to a
station” (page 20). (Receive “TV1” or “TV2” in
step 1.)
TV/Other Video Components
ENTER
MENU
MODE
SOURCE
V/v
B/b
Tips
• Storing desired channels beforehand
makes it easy to select a program for
viewing.
• You can store 6 stations each in the TV1
and TV2 bands, resulting in a total of 12
stations.
• When no button is operated for about 5
seconds, the regular display appears
again.
Selecting a channel
Store a channel
manually
Assign name to a TV
station
Preparation: To view TV programs on
this unit, an optional Sony TV tuner unit
XT-63V must be connected to the
connection box.