Filter
Top Products
19
Storing stations manually
You can also store manually desired stations in memory.
1
Press SOURCE to switch to radio reception.
2
Press MODE to select the frequency band in
which you want to store stations.
With each press of the button, the unit cycles through the
bands in the following order:
FM1 t FM2 t FM3 t AM1 t AM2
3
Lightly press B or b.
The unit automatically searches for stations and stops when
one is found. Continue to search until the desired station is
found.
4
Hold down the desired number button for
more than 2 seconds until the indication
“Memory” (on monitor) or “MEM” (on display
window) is shown.
M1F
ryoMem
No.
6977MHz
.
The number of the selected number button is shown, and the
station is stored in that button.
ENTER
SOURCE
B/b
1-6
Note
When a station is stored in a number
button where another station is already
stored in the same band, the previous
content will be overwritten.
Tip
You can store 6 stations each in the FM1,
FM2, FM3, AM1, and AM2 bands,
resulting in a total of 18 FM stations and
12 AM stations.