Filter
Top Products
90
You can control your cable box/satellite receiver
using the supplied set top box controller. See
“Step 7: Easy Setup” on page 25 for details.
Set Top Box Control
When “Set Top Box Control” is set to “On,” you
can make the following settings. Note that when
you change “Set Top Box Control” to “On” or
“Off,” all of the timer recording settings will be
canceled.
Brand Code
See “Cable Box/Satellite Receiver Brand Code”
(page 117) for the brand code for your cable box
or satellite receiver, and enter the code using the
number buttons and ENTER.
Connection
Selects the connection you used for your cable box
or satellite receiver. When the cable box or
satellite receiver is connected to the recorder’s
LINE IN jacks, select the connection from
“Line1,” “Line2,” or “Line3.” When the cable box
or satellite receiver is connected to the recorder’s
VHF/UHF IN jack, select the output channel,
“Ch2,” “Ch3,” or “Ch4.”
Ch. digit lock
Allows you to select whether to fix the digits for
your cable box or satellite receiver.
Mode for SET button
Select “Mode 1” or “Mode 2” if your cable box or
satellite receiver requires pressing ENTER or
SET, etc., after entering the channel number. If
“Mode 1” does not work, try “Mode 2.” If your
cable box or satellite receiver does not respond to
either setting, contact the manufacturer of the
cable box or satellite receiver.
OSD (On-Screen Display)
Switches the display language on the screen.
DVD Menu (DVD VIDEO only)
Switches the language for the DVD menu.
Audio (DVD VIDEO only)
Switches the language of the sound track.
When you select “Original,” the language given
priority in the disc is selected.
Subtitle (DVD VIDEO only)
Switches the language of the subtitles recorded on
the disc.
When you select “Audio Follow,” the subtitle
language changes according to the language you
selected for the sound track.
z Hint
If you select “Others” in “DVD Menu,” “Subtitle,” or
“Audio,” select and enter a language code from
“Language Code List” on page 116 using the number
buttons.
b Note
If you select a language in “DVD Menu,” “Subtitle,” or
“Audio” that is not recorded on the DVD VIDEO, one of
the recorded languages will be automatically selected.
Set Top Box Control
On Turns on the cable box/satellite
receiver control function. See
“Using the cable box/satellite
receiver control function”
(page 14).
Off
Turns off the cable box/satellite
receiver control function. Select
this if you do not want to use the
supplied set top box controller.
Off
Select this when your cable box or
satellite receiver only accepts a
three or more digit channel
number. Normally select this.
Lock to
two digits
Select this only when your cable
box or satellite receiver only
accepts a two digit channel
number.
Off No code is sent when SET is
pressed. Normally select this.
Mode 1 Sends the channel number you
entered.
Mode 2 Sends the channel number you
entered.
Language