Filter
Top Products
62
To resume normal playback, press H PLAY.
b Notes
• To enjoy the TVS function, set “Digital Out” to “On”
and “Dolby Digital” to “D-PCM” in “Audio” setup.
• The volume may be reduced when surround effects are
set.
• When the playback signal does not contain a signal for
the rear speakers, the surround effects will be difficult
to hear.
In addition, the surround effects may also be difficult to
hear depending on the title being played and the
environment where the recorder is being used.
• When you select one of the surround modes, turn off
the surround settings of the connected TV or amplifier
(receiver).
• Make sure that your listening position is between and
at an equal distance from your speakers, and that the
speakers are located in similar surroundings.
• Angles and subtitles cannot be changed with titles
recorded on this recorder.
• 96 kHz PCM audio and DTS audio do not have
surround effects.
• The surround effects do not work while performing
playback quickly with sound.
To playback quickly with sound (Scan Audio)
When you press M during playback of a title
recorded in the HDD, you can play quickly with
dialogue or sound (“x1.5” appears).
No sound is output when you press M two or
more times to change search speed.
To resume playback from the point where you
stopped (Resume Play)
When you press H PLAY again after you stop
playback, the recorder resumes playback from the
point where you pressed x STOP.
To start from the beginning, press TOOLS to
select “Play Beginning,” and press ENTER.
Playback starts from the beginning of the title/
track/scene.
The point where you stopped playing is cleared
when:
–you open the disc tray (except for HDD).
–you play another title (except for HDD).
–you switch the Title List menu to Original or
Playlist (HDD/DVD-RW in VR mode only).
–you edit the title after stopping playback.
–you change the settings on the recorder.
–you turn off the recorder (VIDEO CD/CD/
DATA DVD/DATA CD only).
–you make a recording (except for HDD/DVD-
RWs in VR mode).
–you switch between JPEG and MP3.
b Note
You cannot resume playback during TV Pause.
(fast reverse/fast forward)
Fast reverses/fast forwards the disc when pressed during playback.
Search speed changes as follows:
fast reverse fast forward
m1 Tt 1M
*1
m2 TT tt 2M
m3
*2
TTT ttt 3M
*2
When you press and hold the button, fast forward/fast reverse continues at the
selected speed until you release the button.
*1
When you press M once during playback of a title recorded in the HDD, you
can play quickly with sound (“x1.5” appears).
*2
m3 and 3M are only available for the HDD and DVDs.
(slow, freeze frame)
* Playback direction only
Plays in slow motion when pressed for more than one second in pause mode.
Plays one frame at a time when pressed briefly in pause mode.
X PAUSE Pauses playback.
Buttons
Operations
-
RWVR
-
RW
Video
+
RW
-
R
+
R
VCD
DVD
*
+
RW
HDD