Filter
Top Products
9
GB
Getting Started
4 Press ENTER.
The date and time setting window is
displayed. The year digits will flash.
5 Set the date and time.
1 Press the jog lever up or down (>/
.) to select the digits of the year.
2 Press ENTER.
The month digit will flash.
3 Set the month, day, and the time in
sequence, then press ENTER.
The menu mode will be displayed again.
6 Press MENU.
The window will return to the normal display.
To cancel the operation
Press CANCEL to return to the previous step of the operations.
To display the current time
Press ENTER while the unit is in the stop mode
(page 27).
The current time will be displayed for three
seconds.
Note
When no “Memory Stick” is inserted or the power is
turned off, the current time will not be displayed.