Sony ICD-BM1A MP3 Player User Manual


 
Other Functions
45
GB
4 Select the alarm time.
1 Press the jog lever up or down (>/
.) to select the hour digits, and press
ENTER.
The minute digit will flash.
2 Press the jog lever up or down (>/
.) to select the minute digits, and
press ENTER.
5 Press the jog lever up or down (>/
.) to select the alarm sound either
from “BEEP & PLAY” (for starting
playback after the alarm) or “BEEP
ONLY” (for only the alarm).
6 Press ENTER.
The setting is finished.
7 Press MENU to exit the menu mode.
The display returns to the normal display.
,” is displayed when the message having
an alarm setting is selected.
To go back to the previous step
In steps 2 through 5, press CANCEL to go back to the previous step.
When the set date and time comes
At the set time, the alarm will sound for about 10 seconds and the selected
message will be played back (If you have selected “BEEP ONLY“ in step 5,
only the alarm will sound).
During alarm playback, “ALARM” will flash in the display window.
1To listen to the same message again
Slide the control key to PLAY. The same message will be played back from the
beginning.
1To cancel the alarm setting before the playback starts
Press CANCEL while the alarm sound is heard.
Continued