Filter
Top Products
Other Functions
41
GB
Setting the Overwrite Mode
You can select the overwrite mode when you add an overwrite recording
to a previously recorded message.
1 Press MENU.
The menu mode will be displayed.
2 Press the jog lever up or down (>/
.) to select “OVER WT” (overwrite),
then press ENTER.
The overwrite mode selection window is
displayed.
• OVER: The portion left after the overwrite recording will remain in
the message.
Jog lever (>/.)
The remaining portion in Message 2
Added overwrite recording in Message 2
Message 2 Message 3
Message 3
Message 2
Starting point of the overwrite
recording
Stopping point for the overwrite recording
Message 1
Message 1
MENU
ENTER
CANCEL
Continued