Filter
Top Products
Basic Operations
23
GB
1 When you play back to the end of the last message
When the unit locates the end of the last message, “MSG. END” flashes 3 times
with a beep and the OPR indicator lights in green.
•When “MOVE CONTROL KEY TO STOP POSITION” appears, slide the
control key to STOP. The unit will stop at the end of the last message.
•To go back to the beginning of the first message in a folder during stop mode,
press the jog lever up (>).
•If you slide the control key to B.SPACE or keep pressing the jog lever down
(.), the messages are played back rapidly, and normal playback will start
at the point you release the button.
•If the last message is long and you wish to start playback at a later part of the
message, keep pressing the jog lever up (>) to go to the end of the message
and then press the jog lever down (.) to go back to the desired point.
Quickly locating the point at which you wish to start
playback (Easy Search)
When EASY-S is set to ON (page 51) in the menu, you can quickly locate
the point you wish to start playback by pressing the jog lever up or down
(>/.) repeatedly during playback.
You can go back approximately 3 seconds by pressing the jog lever down
(.) once, or advance approximately 10 seconds by pressing the jog lever
up (>) once. This function is useful when locating a desired point in a
long recording.
Playing back a message repeatedly — Repeat Play
When REPEAT is set to ON in the menu (page 50),
you can play back a message repeatedly.
Slide the control key to PLAY. “MSG.REPEAT“
will be displayed and the selected message will be
played back repeatedly.
To stop playback, slide the control key to STOP.
To resume normal playback, set REPEAT to OFF in
the menu.