Filter
Top Products
Additional Operations
97
Operation
1 Turn on the TV and select the video input.
2 Turn on the AV cordless IR receiver.
3 Set the LINE SELECT switch on the
player to OUT.
4 Press POWER to turn on the player.
5 Set the POWER switch on the AV
cordless IR transmitter to ON.
The POWER indicator lights up.
6 Adjust the angle and direction of
the AV cordless IR transmitter to
match the AV cordless IR receiver.
Place the player directly in front of
the TV within the range specified
on the right.
7 Start playback on the player.
8 Adjust the distance and angle between the AV cordless IR transmitter
and the AV cordless IR receiver so that the playback picture appears
clearly on the TV.
To turn off the equipment
Be sure to turn off the AV cordless IR transmitter before you turn off the
player.
Notes
• Do not cover the AV cordless IR transmitter and the AV cordless IR receiver with
your hands or other objects.
• Infrared rays cannot pass through walls or opaque glass. Be sure to place the player
in an unobstructed position. Using LASER LINK through glass will shorten the
transmission range.
• Do not place the player too close to the TV, as this may cause noise and/or beat.
• When using the battery pack, picture or sound noise may appear or the
transmission range may be shortened if the battery power is low. Use the AC power
adaptor or charge the battery pack.
POWER
3 m or less,
directly in front
AV cordless
IR transmitter
AV cordless
IR receiver