Filter
Top Products
19
Getting Started
Getting Started
Receiver (Amplifier) Hookups
This connection is for listening to the sound through speakers
connected to a receiver without a built-in DTS, Dolby* Digital or MPEG
decoder. Refer as well to the instructions supplied with the component
to be connected.
Be sure to set the LINE SELECT switch to OUT.
z You can enjoy surround sounds even if you connect front speakers only
You can use 3D sound imaging to create virtual rear speakers from the sound of the
front speakers (L, R) without using actual rear speakers (VES:Virtual Enhanced
Surround). For details, see page 60.
* Manufactured under license from Dolby Laboratories.
“Dolby,” “Pro Logic” and the double-D symbol are trademarks of Dolby
Laboratories.
Confidential unpublished works. ©1992-1997 Dolby Laboratories. All rights
reserved.
Required cords
Audio/Video connecting cord (supplied) (1)
S video cord (not supplied) (1)
When connecting the cords, be sure to match the color-coded cord to the
appropriate jacks on the components: Red (right) to Red and White (left) to
White. Connect the Black jack of the audio/video connecting cord to AUDIO
OUT (White) on the player. Be sure to make connections firmly to avoid hum
and noise.
If you have a digital component such as a receiver (amplifier) with a digital
connector, DAT or MD, connect the component via the OPTICAL OUT
connector using an optical digital connecting cord (not supplied).
Optical digital connecting cord (not supplied) (1)
Yellow
White (L)
Red (R)
Yellow
Black
Optical
mini-plug
Optical plug
continued