Filter
Top Products
18
Getting Started
TV Hookups (continued)
Setups for the player
Some setup adjustments are necessary for the player depending on the TV or
other components to be connected.
Use the setup display to change the various settings.
For details on using the setup display, see page 76.
• To connect the player to a wide-screen TV
In the setup display, set “TV TYPE” in “SCREEN SETUP” to “16:9”
(default setting). For details, see page 83.
• To connect the player to a normal TV
In the setup display, set “TV TYPE” in “SCREEN SETUP” to “4:3 LETTER
BOX” or “4:3 PAN SCAN.” For details, see page 83.
When you play a disc recorded in the PAL color system, the player
outputs the video signal or the setup display etc. in the PAL color system
and the picture may not appear on NTSC color system televisions. In this
case, open the disc tray and remove the disc.
Notes
• Refer to the instructions supplied with the component to be connected.
• Do not connect this player to a video deck. If you do, noise may appear in the
picture.
Connect
directly
VCR
TV
CD/DVD
player