Filter
Top Products
GB
50
Setup
Selecting languages from OTHER
1 Use ', ", \, | to select “OTHER”, then
press ENTER to set the “OTHER” input
item (two letters).
2 For example, to select “AF” (Afrikaans), use ' or " to select “A” as the
first letter, use \ or | to move to the second place, then use ' or " to
select “F”.
• When “A” is selected for the first letter, only letters to the right of codes
beginning with “A” can be selected as the second letter. Refer to the codes
beginning with “A” on the language code list on menu screen (see next page).
Example: First letter – A
Second letter – A, B, F, M, R, S, Y or Z
FRANÇAIS SVENSKA
AA
DEUTSCH NEDERLANDS
I
T
AL
I
NOA OTHER
FRANÇAIS SVENSKA
A F
DEUTSCH NEDERLANDS
I
T
AL
I
NOA OTHER
3 Press ENTER to return to the DVD SET UP screen.
• Some discs allow disc menu language setting from the disc menu. See page 78
for more information.
• Some discs will not allow the menu language to be changed.
MPEG OUT setting
Simultaneous output of an analogue and digital audio signal is not possible for the
AUDIO/DIGITAL OUT (OPTICAL) when playing MPEG 5.1 channel software. As a
result, 2-channel analogue output will not be possible at the time of digital 5.1
channel output. To this end, it will be necessary to set either a digital output of the
MPEG audio or an analogue output using MPEG OUT on the DVD SET UP screen.
1 Use ' and " to select “MPEG OUT”.
2 Use \ and | to select the setting you
want, and then press ENTER.
TV setting: Set this when using the analogue output of the MPEG
audio (e.g., TV 2-channel stereo).
AMP setting: Set this when using MPEG multiplex audio with a digital
connection to the amplifier. (The 2-channel analogue
output is not possible at this time)
3 Press ENTER to exit the setup procedure. The startup screen then appears.
––
DEUTSCH NEDERLANDS
I
T
AL
I
NOA OTHER
D
ISC
M
N
G
UA
G
EE
N
U
L
A
TV MO D E SET
DV UPDSET
19
6
:
EN
EN
DISC MENU LANGUAGE
OSD LANGUAGE SETUP
MPEG OUT TV