Sharp DV-L70S Portable DVD Player User Manual


 
35
GB
Be sure to charge a battery pack before using it.
To attach a battery pack to the DVD player
Make sure the DVD players main power switch is in the OFF position.
1 Align the battery guide " with the '
mark (1) on the battery pack.
2 Slide the DVD player in the
direction indicated by the arrow (2).
3 Plug the battery packs DC cable into the
DC input jack of the DVD player.
Important!
To prevent mis-operation while attaching or removing the battery pack, make
sure the main power switch of the DVD player is in the OFF position.
Make sure that the battery pack is positioned correctly when you attach it to
the DVD player. Positioning it wrong can cause malfunction.
Remove the battery pack from the DVD player when you are through using it.
The battery pack becomes warm during use. This is normal and does not
indicate malfunction.
Helpful Hints
Using the AC Adapter with the Battery Pack
A safety feature automatically turns off DVD player power if you set the volume
level too high while playing certain types of discs. If this happens, lower the
volume level and restart play.
You can charge the battery pack while it is attached to the DVD player by
connecting the AC adapter to the DVD player and turning off DVD player power.
The DVD player is powered by the AC adapter if you turn it on under the
above conditions. The battery pack is not charged while DVD player power
is turned on.
Using a Battery Pack (Sold Separately)
Battery
guide
1
2