Filter
Top Products
TIMECODE
49
Overview Quick Guide Getting Ready IN/OUT/Monitor
Recording/Playback
Mixer Timecode File Operation USB Appendix
Internal Timecode
Here’s how to set the time of the internal timecode.
1. Choose [MENU]Ú<TIMECODE/TIME>Ú<SET INT TC>.
2. Touch the number that you want to edit, and use
to edit the value.
3. Touch <SET> to apply the edited values to the timecode.
The specied time will be shown in <CURRENT> (current time).
Manually Jamming to External
Timecode
Here’s how you can read the timecode being output from a device
connected to the TIMECODE IN jack, and apply it to the <CURRENT>
(current time) of the internal timecode.
1. Choose [MENU]Ú<TIMECODE/TIME>Ú<SET INT TC>.
2. Touch <JAM SET> to apply the timecode sent from the
external device.
The timecode sent from the external device will be shown in
<CURRENT> (current time).
Specifying the REC-RUN Start Time
When REC RUN mode is selected (p. 47), here’s how to specify the
start time (REC RUN TC).
1. Choose [MENU]Ú<TIMECODE/TIME>Ú<SET REC RUN TC>.
2. Touch the number that you want to edit, and use
to edit the value.
If TIMECODE MODE is set to REC-RUN, this time will advance only
during recording.
3. Touch <SET> to apply the edited values to the timecode.