Filter
Top Products
15
Quick Guide
Overview Quick Guide Getting Ready IN/OUT/Monitor
Recording/Playback
Mixer Timecode File Operation USB Appendix
Getting Ready
1
Preparing the Power Supply
Prepare batteries, an external power supply, or the AC adaptor.
page 23
This Quick Guide explains basic operation.
For details, refer to the pages shown by the
page XX
symbol.
Installing batteries
Insert batteries, taking care to observe the
correct polarity.
Loosen these
two screws.
Connecting the external power supply
1. On the side panel (left), set the external power supply
select switch to “EXT BATTERY.”
2. Connect the cable of a commercially available external
power supply to the DC IN jack.
3. Specify the nal voltage.
* For details on making this setting, refer to “Using External
Power Sources” (p. 24).
Connecting the AC adaptor.
1. On the side panel (left), set the external power supply
select switch to “AC ADAPTOR.”
2. Connect the AC adaptor.
Turn on the power
Slide the [POWER] switch on the front panel in
the direction of the arrow, and hold it there for
several seconds.
Preparing an SD Card
Insert a commercially available SD card.
page 26
1. Open the rubber ap located on the left side panel.
* The cover may break if you use excessive force.
2. Insert the SD Card.
Label facing
upward