Filter
Top Products
Input Settings
30
2. Touch the input whose cuto frequency you want to
specify.
3. Touch the desired cuto frequency.
Limiter Settings
A limiter is provided for each input, allowing the input levels to be
compressed so that the recording will not be distorted even if loud
sounds are input. Touch the <LIMITER> tab, and you can turn each
input’s limiter on/o and adjust its threshold and release time.
On/o settings
1. From the home screen (recording), choose
<INPUT>Ú<LIMITER>.
2. Touch the icon for each input to turn it on/o.
Threshold and release time settings
You can adjust the level at which the limiter will be applied
(“threshold”), and the time over which the compression eect
disappears after the signal has fallen below the threshold level
(“release time”).
1. Touch <PARAM>.
“LIMITER PARAM” screen will appear.
2. Touch the input whose threshold and release time you
want to adjust.
3. Drag the <THRESHOLD> slider or <RELEASE> slider to the
left or right to specify the value.
Once you’ve touched the slider, you can also use the [ ] (−)
button and [ ] (+) button on the front panel to edit the value.