Filter
Top Products
19
Overview Quick Guide Getting Ready IN/OUT/Monitor
Recording/Playback
Mixer Timecode File Operation USB Appendix
Quick Guide
Recording/Playback
Recording will take place using the input settings and audio le settings you made on p. 17 and p. 18. You can then play back the recorded le.
Recording
1. Press the [ ] (REC) button.
The button will light, and recording will begin.
2. Press the [ ] (STOP) button to stop recording.
Playback
1. Press the [ ] button.
The recorded project will begin playing back.
During playback, you can hold down the [
] button to rewind, or
hold down the [ ] button to fast-forward. When you release the
respective button, playback will resume.
When playback reaches the end of the project, it will stop. If you
want to stop before the end of the project, press the [
] (STOP)
button.
During playback, you can press the [
] button to pause
playback. When you press the button once again, playback will
resume from the location at which you paused.
page 37 page 39
Deleting
Here’s how to delete a recorded project.
page 53
Saving to a Computer
Here’s how to save a recorded project to your
computer.
page 61
1. Choose [MENU]Ú<FINDER>.
2. Touch the name of the project or folder that you want to
delete.
The recorded project will blink.
3. Touch <DELETE>.
4. Touch <YES>.
1. Start up your computer.
2. Use a commercially available USB cable to connect the
R-88 to your computer.
3. Touch <STORAGE>.
* Only if you’ve selected “SELECTABLE”
4. On your computer, copy the desired le(s) from the SD
card.