Filter
Top Products
Chapter 4 Configuring StorNext
Windows Configuration Utilities
StorNext 3.1.3 Installation Guide 75
FS Name Servers 4
To access a file system, you must first specify the name server (StorNext
host) where the file system is located. The first host in the list is the
primary name server. Additional hosts are backups for use in the event of
a failover.
Use the FS Name Servers tab (figure 38) to specify the primary StorNext
host. Table 15 describes the fields on the FS Name Servers tab.
Select Drive - Drive
Select the mapped drive to configure on the
other tabs of the Client Configuration utility.
Unmap Drive
Select a drive to unmap.
Unmap
Click to unmap the selected drive.
Display File System
Critical Events to
Desk Top
Select to display a notification dialog box if a
critical event occurs.
(Because the dialog box must be manually
dismissed, clear this check box for unattended
client systems.)
Disable SNFS ONC
Portmapper Process
Select to disable the SNFS portmapper service.
(Disable this service only if a product that
provides equivalent functionality is installed,
for example, the portmapper installed with
Microsoft Services for Unix).
Don’t Register with
ONC Portmapper (port
111)
Select to not register with the SNFS
portmapper service.
Note: Make sure the host list is the same for all clients on the SAN.
An incorrect or incomplete host list may prevent the client
from connecting to the file system.
Field / Button Description