Filter
Top Products
Chapter 1 Installing StorNext File System and Storage Manager
StorNext Installation Script
StorNext 3.1.3 Installation Guide 16
3 To confirm the change, type yes and press <Enter>.
To customize additional directory locations, repeat steps 1–3.
4 When you are done customizing the installation, press <Enter> to
return to the Main Menu.
Changing the Default Media Type 1
If you do not specify a different media type, the StorNext installation
script selects LTO as the default media type for storage devices. If storage
devices in your system use a different media type, change the default
media type before installing StorNext.
1 On the Configuration Menu, type 15 and press <Enter>.
A list of valid default media types is shown. The valid media types
are: DDISK, SDISK, LTO, LTOW, 3590, 3592, 9840, 9940, AITW, AIT,
DLT4, and T10K.
2 Type the correct default media type for storage devices in your
system and press
<Enter>.
3 To confirm the change, type yes and press <Enter>.
4 When you are done customizing the installation, press <Enter> to
return to the Main Menu.
Note: To help determine the optimal location for StorNext support
directories, use the StorNext pre-installation script. For more
information, see
Pre-Installation Script on page 8.
Note: The DDISK option is available only for MDCs running
x86 (32-bit or 64-bit) versions of Linux.
Note: For multiple libraries or systems with mixed media types,
specify the media type used in the primary backup.