Filter
Top Products
18
SilverBoom 300
www.silverstarlifts.com
MANUAL LIFT STRAP OPERATION
The SilverBoom 300 with a power rotating base is
equipped with a lift strap manual override that serves as
backup in the event of a power failure. Using the sup-
plied tool, rotate the manual crank located at the front of
the boom-arm motor housing clockwise or counterclock-
wise to move the lift strap up or down. See figure 19.
NOTE: Attaching the supplied tool to a power
drill will increase the speed at which the lifting
strap will move.
BOOM-ARM MANUAL ROTATION
(MODELS WITH A POWER ROTATING
BASE)
In the event of power failure, the boom-arm can be manu-
ally rotated by pulling back the flip handle to disengage
the securement pin. See figure 20. This allows the boom-
arm to swing freely. To secure the boom-arm, rotate it
until the flip handle securement pin “clicks” into the up-
per post.
MANUAL OVERRIDE TOOL INSERTION POINT
Figure 19. Lift Strap Manual Override
IV. OPERATION
FLIP HANDLE
BOOM-ARM
UPPER POST
Figure 20. Lift Strap Manual Override
12. Disconnect the power to the SilverBoom to prevent any accidental movement when transporting your
mobility product.
WARNING! Your SilverBoom was designed to be mounted primarily in a motor vehicle.
Mounting your SilverBoom on a platform, where the height of the lift may cause the lifting
strap to extend beyond a safe point, can damage the SilverBoom and injure the lift operator.