11
english
Possible errors.
- Cable problem, check that there is light in all the ports of the switch/hub
- There is a fi rewall installed on the Computer which blocks the ports used by KiSS PC-Link or KiSS MacLink (port 8000 must be open)
- The player and the Computer are not on the same Subnet (problem with playing video)
- Your Computer has been assigned a new IP address from the DHCP server. It may differ from the one entered in the player. (Using a static IP on the Computer will counter this) - KiSS
PC-Link or KiSS MacLink have to be running for the player to access the data
KiSS DP-600
Crossed cable
Computer
KiSS DP-600
Computer
Switch
Equipment required
• Switch/hub and 2 straight cables or a crossed cable.
• A Windows PC or a Macintosh with an Ethernet connection.
• KiSS PC-Link Software CD for Windows PC or download KiSS MacLink for Macintosh at www.kiss-technology.com/support under Software.
Step-by-Step Guide
1 Connect the player to the Computer with a crossed cable or to a switch connected to the PC.
2a On the PC select Network Connection in the Control Panel. Open Properties for the network connection that is connected to the Player.
Select Properties for the Internet Protocol (TCP/IP). Select “Use the following IP address”.
2b On the Macintosh go to System preferences and select Network. Click on Confi gure, go under the TCP/IP Pane. Under Confi gure IPv4 select Manually.
3 Enter the IP address below:
IP address 192.168.0.1
Subnet mask 255.255.255.0
4 Start the player, press SETUP on your remote and go to NETWORK SETTINGS. Check that WIRED is selected under NETWORK INTERFACE and that
AUTOMATIC CONFIGURATION (DHCP) is DISABLED.
5 Go to NETWORK CONFIGURATION
6 Then enter the following addresses:
IP: 192.168.000.002; SUBNET: 255.255.255.000; GATEWAY: 192.168.000.001; DNS: 192.168.000.001; ALT. DNS: 0.0.0.0
7 Press OK to exit this menu. Then MENU and go to PC-LINK.
8 Press SELECT HOST, the name of the server should appear on your screen, press OK to select it.
9 Choose between AUDIO FILES, VIDEO FILES or PICTURE FILES. The player will display the list of fi les available from your Computer.
10 If you have any problems, please check the FAQ on our web site for any questions. If you cannot fi nd the answers then contact the KiSS Hotline.
Your player should now be connected.
Ethernet Network using a direct connection to the Computer
Having physically set up your player, you will need to confi gure your wireless network in the player Setup menu to be able to communicate with the rest of your network. To do
this, please press the SETUP button to enter the Setup menu, select the network tab in the menu and change the settings according to the procedure described below:
Network Interface: Select “Wireless” from this menu to acknowledge that you would like to use a wireless network.
Wireless Authentication: The Wireless Authentication menu item allows you to set the type of encryption used on your wireless network. Encryption is used to keep data
exchange between your player and the rest of your network scrambled. This is done in order to protect you from exposing of personal or sensitive information to other wireless
users in the vicinity. For the player to be able to communicate with your wireless network, the encryption will need to be set to exactly the same in the player as on the wire-
less router or access point you will be connecting to. If the wireless router/access point is running with no encryption, your player should be set accordingly. However, KiSS
recommends that you always use encryption on your wireless network, so if possible please have your router set to WEP encryption and enable WEP encryption on your player
accordingly. If you do not know what type of encryption is enabled (if any) in your wireless router/access point, please refer to its manual on how to see or set it up.
Encryption Key: If you are running an encrypted wireless network, all devices on your network will need to share the same encryption key in order for them to communicate.
Please enter this menu item to bring up the on-screen keyboard where you will be able to enter the key you are currently using in your wireless router/access point. If you do
not know which encryption key is used on your wireless router/access point, please refer to its manual for information on how to see it or set it up.
Setting up a Wireless Network
english