Filter
Top Products
EN 9
INFORMATION
● If “AUTO CLOCK” is set to “ON” at the Clock Set screen on page 11, the clock will be adjusted automatically by the host
channel every hour on the hour (except for 11:00 PM, midnight, 1:00 AM and 2:00 AM) by the incoming PBS channel clock
setting data. (This automatic clock adjustment can only be performed when the recorder’s power is turned off. The clock will
be adjusted on the hour based on the time displayed on the recorder, not on the actual real time.) The default setting of
“AUTO CLOCK” is “ON”.
● If the memory backup fails, because of a power outage or because the AC was removed from the recorder, Plug & Play will be
performed when power is restored to the recorder.
What To Do If Plug & Play Has Failed
● If an incorrect time is displayed on the front display panel, you may be receiving the clock setting data of a PBS channel from
an adjacent time zone, or an incorrect PBS channel from a cable TV system. In this case, perform the Semi-Auto (੬ pg. 11) or
Manual Clock Set (੬ pg. 12) procedure. Auto channel set has already taken place and it need not be set again.
● If “- -:- -” appears on the display, your antenna cable may not be connected to the recorder or there may not be a Host PBS
signal available in your area. Ensure that the antenna cable is connected correctly. Then power on and power off the recorder;
the Plug & Play function will be automatically reactivated and “Auto” will be displayed on the recorder’s front panel. If Plug &
Play is not performed but the antenna cable is connected correctly, perform the Manual Clock Set procedure (੬ pg. 12). Auto
channel set has not yet taken place, so please also perform the “Set Receivable Channels” procedure (੬ pg. 13).
INITIAL SETTINGS
Plug & Play
The Plug & Play function sets the clock and tuner channels
automatically when power is first connected to the recorder.
The antenna cable must be connected for the Plug & Play
function.
The time and date can be set automatically from clock setting
data that is transmitted by one of the regular TV broadcast
channels. We call this TV channel the “Host Channel” and it is
a PBS channel in your area.
PLUG & PLAY SETUP
1
Connect the antenna cable to the recorder on the
previous page. Then connect the recorder’s power
plug to an AC outlet. Do not power on the recorder.
The clock and tuner channels will be set automatically.
NOTES:
●
Auto clock set is performed first. The auto clock set
function scans all the channels received by your
recorder to find the Host Channel and then sets the
clock. "Auto" blinks on the front display panel during
Auto clock set.
●
Auto channel set is performed next. The auto channel
set function scans all the channels that are receivable
by your recorder. It then automatically assigns each
receivable channels to the CH +/– buttons. It skips
non-receivable channels. During auto channel set the
channel numbers are displayed as they are scanned
and set.
●
When Plug & Play has been completed successfully the
correct time is displayed.
●
If an incorrect time or “– –:– –” appears on the
display panel, see “What To Do If Plug & Play Has
Failed” below.
ATTENTION
If you use a cable box, Plug & Play will not function; set
the clock and tuner channels manually. (੬ pg.10 – 13)
Auto Clock Set/Auto Tuner Set
IMPORTANT
● Don’t press any buttons on the recorder or remote while
Plug & Play is in progress.
● If you perform Plug & Play successfully, there’s no need to
perform the Clock (੬ pg. 10) and Tuner (੬ pg. 13)
procedures. If, however, you want to add or delete
channels, refer to “Add Or Delete A Channel” on page 14.
DIGITPURE TECHNOLOGY
HM-HDS1
POWER
S-VHS ET
S-VHS
HDD
OK
MENU
REC LINK
CH
NAVI
STOP PLAY PAUSE REC
REW FEW
A. DUB
EJECT
VIDEO
PAUSE
S-VIDEO
(M) L – AUDIO – R
F - 1
During Initial Auto Clock Set
"Auto" blinks.
During Auto Channel Set
The channel numbers are displayed
as they are scanned and set.
* If an incorrect time or “– –:– –” appears on the display panel, see “What To Do If Plug & Play Has Failed” below.
Plug & Play Completed
The current time (including
AM/PM) is displayed.