Filter
Top Products
58 EN
TIMER RECORDING (cont.)
You can directly program the recorder’s timer to record up to 16
shows each on the HDD and VHS decks, as far as a year in
advance. Remember, the clock must be set before you can
program the timer (੬ pg. 10 or 12).
Express Timer
Programming
Turn on the TV and select the AV mode.
TURN ON THE UNIT
1
Press POWER.
ACCESS PROGRAM
SCREEN
2
Press PROG. on the
remote control. The
program screen appears.
● If you do not set the
clock, the message
and the Initial Set
screen will appear.
● If you have already
reserved 16 programs, the message and the program
check screen will appear.
● If you want to reset this reservation during this
procedure, move the arrow to “CANCEL” by pressing
@# (or 23), then press OK.
● If you want to cancel this reservation, press PROG..
SELECT THE DECK TO BE
RECORDED ON
3
Press HDD or VHS (or S-VHS).
● If you select VHS deck, load the cassette for
recording.
SET PROGRAM DATE
4
Press DATE +/–. (The current date is displayed on
screen. The date you enter appears in its place.)
● If the date of the next year appears, press DATE +.
SET PROGRAM START TIME
5
Press START +/– to enter the time you want recording
to start.
● Press and hold START +/– to move in 30-minute
increments, or press and release repeatedly to move 1
minute at a time.
SET PROGRAM STOP TIME
6
Press STOP +/– to enter the time you want recording to
stop.
● Press and hold STOP +/– to move in 30-minute
increments, or press and release repeatedly to move 1
minute at a time.
PROGRAM
CONFIRM CANCEL CATEGOTY MISC.
RECORD TO
HDD SEP WEEKLY
11:30 PM 12:00 AM 06/12/01 TUE 5 CH
SPEED DAIRY/WEEKLY
START TIME STOP TIME DATE
CATV
SOURCE
CH
+
–
START
+
–
STOP
+
–
DATE
+
–
CH END
PROG.
SET PROPGRAM WITH [EXPRESS +/–, 8=DAILY,
9=WEEKLY, 7=DBS] THEN PRESS "CONFIRM"
123
4 56
789
0
2
1
4
3
>
<
1
2
–
+
DIGITPURE TECHNOLOGY
HM-HDS1
POWER
S-VHS ET
S-VHS
HDD
OK
MENU
REC LINK
CH
NAVI
STOP PLAY PAUSE REC
REW FEW
A. DUB
EJECT
VIDEO
PAUSE
S-VIDEO
(M) L – AUDIO – R
F - 1
POWER
POWER
NUMBER
HDD
S-VHS
VHS
TIMER
WEEKLY
PROG.
OK
OK
REC SPEED
STOP +/–
CH+/–
DATE +/–
OK
CH+/–
HDD
DAIRY
START +/–