Filter
Top Products
EN 55
IMPORTANT
If you have moved to a different area or if a broadcasting
station´s channel number has been changed, the wrong
VCR or CABLE CH number will be displayed on the VCR
Plus+ program screen in step 6. When this happens, set the
correct the Guide Channel number for that station. (੬ pg.
56, “Changing VCR Plus+
®
Setting”)
NOTES:
●
To disengage the timer before recording starts, press
TIMER
again. Pressing once more re-engages it.
●
In case of a power failure after programming, the recorder’s
memory backup keeps your selections for approximately
60 minutes.
●
When timer-recording cable channels received through a
Cable Box, be sure to keep the Cable Box set to ON.
●
It is not possible to timer-record the same programme on both
the VHS deck and the HDD deck simultaneously.
●
If the times that are programmed for recording on the HDD
deck and on the VHS deck overlap, the earlier start time takes
precedence. If the start times are the same, the VHS deck
takes precedence.
CHECK PROGRAM DATA
6
The PlusCode number
you entered and the
matching Timer-
Recording information
are displayed on the
Program screen. Check
to make sure their
correct.
● To change the stop
time, press STOP +/–.
● To timer-record daily or weekly serials, press DAILY
(NUMBER key “8”) or WEEKLY (NUMBER key “9”).
“DAILY” or “WEEKLY” appears on the Program
screen. Pressing the button again makes each
corresponding display disappear.
● You can also set category.
1) Press @# (or 23)
to move the arrow
to “CATEGORY”,
then press OK. The
Category Set screen
appears.
2) Select the desired
category by pressing
@%#fi (or
253∞), then press
OK.
2) Confirm the arrow is on the “RETURN”, then press
OK. The Program screen resumes.
● If you want to cancel this reservation, move the arrow
to “CANCEL” by pressing @# (or 23), then press
OK. Or, press PROG.
SET TAPE SPEED
7
Press REC SPEED. Each time the button is pressed, the
recording speed changes as follows:
For HDD deck:
SP = LP = EP = SEP = SP = ···
For VHS deck:
SP = EP = SP = ···
RETURN TO NORMAL
SCREEN
8
Move the arrow to “CONFIRM” by pressing @%#fi (or
253∞), then press OK. “PROGRAM COMPLETED”
appears on the screen for a while, then normal screen
appears.
● If there is a conflict in the timer schedule and one
program overlaps with another, the correction screen
will appear. In this case, correct the program data.
See page 60.
● If you select VHS deck, press TIMER. The recorder
turns off automatically and "‰" is displayed on the
display panel.
PROGRAM
PLUS CODE NO.
12365
CONFIRM CANCEL CATEGOTY MISC.
RECORD TO
HDD SEP WEEKLY
11:30 PM 12:00 AM 06/12/01 TUE 5 CH
SPEED DAIRY/WEEKLY
START TIME STOP TIME DATE
CATV
SOURCE
CH
+
–
START
+
–
STOP
+
–
DATE
+
–
CH END
PROG.
SET PROPGRAM WITH [EXPRESS +/–, 8=DAILY,
9=WEEKLY, 7=DBS] THEN PRESS "CONFIRM"
CATEGORY
SOAPS
RELIGIOUS
MOVIES
CHILDRENS
SPORTS
SERIES
MUSIC
CLASSICS
OTHERS
SHOPPING
MISC.
COMEDY DRAMA
SPECIAL
NEWSEDUCATIONS
RETURN