Filter
Top Products
76 EN
DIGITPURE TECHNOLOGY
HM-HDS1
POWER
Edit From A
Camcorder
You can use a camcorder as the player and your recorder as the
recorder.
MAKE CONNECTIONS
1
Connect an AV cable between the camcorder’s VIDEO
OUT and AUDIO OUT connectors and your recorder’s
VIDEO IN and AUDIO IN connectors.
● If connecting a camcorder with an S-VIDEO output
connector, it is recommended to use the S-VIDEO
connection to minimize picture degradation while
editing.
● VHS deck ONLY
When a Master Edit Control-equipped JVC camcorder is
used, the camcorder is capable of controlling your
recorder. The mini-plug cable is a mono 3.5 mm
mini-plug to mono 3.5 mm mini-plug connector.
● If connecting to a camcorder with a monaural output,
connect the audio output connector on the
camcorder to AUDIO IN L of the recorder.
TURN ON THE RECORDER
2
Press POWER.
SELECT RECORDING DECK
3
Press HDD or VHS (or S-VHS).
• When you select VHS deck, load a recordable
cassette.
SELECT INPUT MODE
4
Press CH +/– to select depending on the connector
being used – “F-1” for the front panel input connectors,
or “L-1” for the rear panel input connectors.
ACCESS VIDEO INPUTS SCREEN
5
1) Press MENU.
2) Select “FUNCTION SET UP”, then press %fi (or 5∞)
or OK.
3) Select “VIDEO INPUTS”, then press %fi (or 5∞) or
OK.
SELECT VIDEO INPUT MODE
6
Set ”S-VIDEO” or ”COMPOSITE” to “FRONT AUX F-1”
or “REAR AUX L-1” by pressing %fi (or 5∞) or OK.
For details on setting, see page 22.
Recorder
Your recorder
PAUSE connector
Mini-plug cable
(not supplied)
(JVC camcorder only)
Audio/Video
cable
(supplied)
Camcorder
VIDEO OUT
AUDIO OUT
EDIT
VIDEO IN
AUDIO
IN
S-VIDEO IN
S-VIDEO
OUT
S-VIDEO
cable
(supplied)
Player
EDITING (cont.)