Filter
Top Products
Advanced Operations (Second VCR)
60
• Insert the prerecorded videotape in VCR2.
• Insert a blank or erasable tape (with the safety tab intact) into VCR1.
• Press AVX on VCR1 - the LINE indicator will display.
• Press REC/IRT on VCR1, and press PLAY on VCR2.
To monitor the picture as you record, VCR1 must be connected to your TV. The VCR
indicator will light on VCR1's display and you can view the picture being recorded.
Copying Tapes From A Camcorder
If you would like to copy a video tape shot in your camcorder onto your VCR here's how
to do it.
• Connect the camcorder's AV output cable to your VCR. (See diagram below)
Copying Tapes From A Camcorder Hookup Illustration
• Press the AVX button on the VCRs remote control so that the L (Line) indicator
appears in the VCR display. (L2: Front A/V IN; L1: Rear A/V IN.)
• Press REC/IRT on the VCR to start recording.
• Press PLAY on your camcorder to start copying your tape.