Filter
Top Products
Basic Operations (VCR Plus + Recording)
50
2. Use the number buttons to enter the PlusCode of the program you want to record.
This code can be up to eight digits. Do not enter a zero at the beginning of a code -- the
VCR will not accept it. If you enter a wrong digit, press CLEAR and enter the correct
one.
3. If you accidentally enter a nonexistent PlusCode, the VCR gives you an error
message that disappears from the screen in about 10 seconds.
4. If you have entered the correct PlusCode, press GUIDE to store the PlusCode in the
VCR's memory. This brings up another screen:
5. Press number buttons 1, 2, or 3 to select ONE TIME, DAILY, or WEEKLY
RECORDING.
Important: Programming does not take effect unless you select one of these options.
6. When the next screen comes up, choose between standard or extended tape speed
by pressing the TAPE SPEED button. This is also a good time to check the channel
number-- it should be the one on which you usually watch the program at home. (If not,
you need to check your VCR Plus+ channel setup.)