Filter
Top Products
Advanced Operations (Cable Box Hookups)
57
Check all the TV and VCR functions. If you don't get all the functions you want, proceed
with Option 3.
Option 3--Some Channels Scrambled
This hookup requires three coaxial jumpers with connectors, a 1-into-2 splitter, and an
A-or-B switch box.
1. Disconnect the cable from the cable box and attach it to the input line of the 1-into-2
splitter.
2. Using a coaxial jumper, reconnect one of the splitter outputs to the cable box's input
that you just freed up.
3. Using a second coaxial jumper, connect the other splitter output to the A of the A-or-B
switch.
4. Using the cable box output line, connect the cable box receptacle to the B of the A-or-
B switch.
5. Using a third coaxial jumper, connect the output of the A-or-B switch to the IN FROM
ANT lowerjack on the back of the VCR.
6. Take the coaxial cable that is still connected to the television and hook it to the VCR's
OUT TO TV upperjack.
This setup lets you switch between the two configurations in Options 1 and 2. Check all
the TV and VCR functions. If you still don't get the functions you want, proceed with