Filter
Top Products
Basic Operations (VCR Plus + Recording)
48
channel number is the same as the VCR Plus+ channel in your TV listing, do not enter
any number. Press CHANNEL up or down to position a nonmatching station next to the
arrow.
3. If your broadcast channel number is not the same as the VCR Plus+ channel in your
TV listing, use the number buttons to assign the broadcast channel to the corresponding
VCR Plus+ channel.
In the example below broadcast channel #38 is assigned to VCR Plus+ channel #42.
4. Repeat step 3 for all channels that need to be assigned.
5. Press GUIDE to end the setup procedure. You are ready to begin delayed recording
with VCR Plus+.
Cable with a Cable Box Setup
Use this setup procedure if you receive all channels through a cable box. CABLE BOX
SET tells the VCR how to record or to view programs from the cable box. Usually this is
either 03 or 04, but it could be 02, 05 or 06. Consult your cable company if you're not
sure.
1. Press GUIDE, then press 4 to select VCR PLUS SETUP.
2. Press 2 to answer "YES" to the question "Is a cable box being used with the VCR for
all channels?" You will then see this screen:
3. Use the number buttons to enter the cable box's output channel.
4. Press GUIDE to end the setup procedure. You are ready to begin delayed recording
with VCR Plus+. (When you set up a delayed recording, you will need to select the
desired channel using the channel selector on your cable box.)
Cable with a Cable Box and Switchbox Setup