Filter
Top Products
Basic Operations (Recording)
43
To Stop a Delayed Recording in Progress
Press POWER and then immediately - within 10 seconds - press the STOP
(STOP/EJECT) button (use the buttons on the remote or VCR as you wish).
An Example
Let's say you were interviewed today by a local TV reporter. You're eager to see
yourself on the evening news tonight. The news comes on channel 8 at 6 o'clock - but
you've got a meeting scheduledduring that time. Luckily you have just purchased this
Hitachi VCR.
Press GUIDE, press 2 then press 1 to bring up the screen for One Time recording:
Now fill in the blanks:
• Select channel 8 by pressing 0 and 8 on the remote control.
• Enter the start time by pressing 0, 6, 0 and 0 for 6 o'clock. Then press 2 for PM.
• Enter the end time, half past six, as 6:30. The VCR automatically selects PM for you.
• The screen shows today's date, so no changes are needed on that line.
• Press TAPE SPEED to switch to SP because you want the best quality picture for this
recording.
Everything is as you want it, so press GUIDE to set the program in memory.
Insert a videocassette, and power off the VCR. Check for the delayed recording
indicator on the VCR's display. Prepare to admire yourself on the evening news.
Reviewing What You Have Programmed
You can look back over any of the recordings you have preset, and if you need to, clear
out any of the programs. Normal programs will clear automatically once recording is
complete, but daily and weekly settings must be cleared out manually.
• Press GUIDE, then press 3 for the PROGRAM REVIEW option. This brings up the
screen settings for Program 1. Keep pressing 3 to cycle through all the programs you