Filter
Top Products
Getting Started (Controls)
22
GUIDE
Brings up an on-screen setup and programming guide, the Easy Guide System.
TAPE SPEED
Switches between standard play (SP) and extended play (EP).
SLOW SPEED
Plays back in adjustable slow motion.
AVX
Used for recording from an auxiliary input such as a stereo system.
GO-TO/INDEX
Used for marking and searching for specific tape locations.
LIGHT
Illuminates key function buttons for a few seconds.
EJECT
Unloads a cassette tape from the VCR.
LAST CHANNEL (TO CONTROL TV)
Switches to the channel you watched previously during the current viewing session.
CHANNEL
Top button switches to the next higher channel, bottom button switches to the next
lower channel. For these to operate, you must have preset your channels.
REC
Starts recording on the station the VCR is set to. (Press REC and PLAY at the same
time.)
F.FWD
Fast forwards the videotape.
PAUSE/STILL
Temporarily stops the cassette from recording or playing. Press PAUSE again (or
PLAY) to resume.
F.ADV
Lets you advance the tape frame by frame.
CLEAR
Used in on-screen programming and indexing.
TRACKING
Lets you fine tune the picture.