Filter
Top Products
Basic Operations (VCR Plus + Recording)
47
Home Antenna
If your VCR is connected directly to your home antenna, chances are you don't have to
do any special channel setup. To find out, compare the VCR Plus+ channels in your TV
program guide to your list of channels that you receive at home.
If any channel numbers don't match, follow the steps (page 39) to assign your local
channel numbers to VCR Plus+ numbers.
Cable (No Cable Box)
This is the channel setup to use if your VCR is hooked up directly to cable without a
cable box.
Compare your local TV channel listing to your cable company's channel directory to find
channels that need to be assigned to the VCR Plus+ codes. For example:
In the example above none of the cable channels match, all of them need to be
assigned to VCR Plus+ channel codes.
Matching Broadcast CH Numbers to VCR Plus+ Channels
1. Press GUIDE, then press 4 to select VCR PLUS SETUP.
For Home Antenna Setup
You will see the screen as shown below.
For Cable (No Cable Box) Setup
First, the question "Is a cable box being used with the VCR for all channels?" will
appear when you press 1 to answer "NO", you will then see this screen, as shown
below.
2. A small arrow points to a blank "--" in the CHANNEL column. If your broadcast