Filter
Top Products
12
13
English English
The menu structure and options are listed below.
System1.
Select this option to access system settings for the mp200 media player.
Language: Select the OSD language. You can choose among English, Chinese
Traditional, Español, Français, Deutsch, Italiano, Dutch, Pyccкий, Chinese Simplied and
Portuguese.
Screen Saver: Select to turn the screen saver off/on (the default setting is on). After
a period of inactivity, the mp200 will display a moving icon on the screen to prevent
screen burn. You can also choose the amount of time before the mp200 goes into
screen saver mode.
Note: When using a plasma TV, it is recommended to leave the screen saver on.
Restore Default: Select this option to reset the mp200 settings to the factory
defaults.
Firmware Update: Select this option to upgrade the mp200 rmware using a USB
ash drive. The upgrade procedure is below:
Plug an empty USB ash drive into a PC.1.
Download the mp200 rmware le(s) into the root directory of the USB ash drive.2.
Remove the USB ash drive from the PC, and plug it into the mp200.3.
Select the “Firmware Update” option in the System menu, and then choose System 4.
upgrade and press “OK” to continue.
Do not unplug the power during the upgrade procedure. During the rmware 5.
upgrade, the mp200 will restart and then show a progress screen.
When the upgrade is completed, the mp200 will restart and return to the main 6.
screen.