Filter
Top Products
6
About the battery
Your FLO TV™ Personal Television comes with a manufacturer-supplied rechargeable lithium-ion
battery. The FLO TV Personal Television is designed to use only the manufacturer-supplied
battery. Battery performance depends on many factors, including features, settings, and
accessories used on the FLO TV™ Personal Television. For battery time estimates, see “Battery
life” on page 44.
Installing the battery
1. Open the viewing stand to reveal the back cover.
2. Remove the back cover by sliding it in the direction towards the side where the connectors
and the FLO TV™ Personal Television’s buttons are located.
3. Align the battery’s exposed copper contacts with the battery connectors in the battery
compartment then gently push the battery into place.
4. Replace the back cover.
Charging the battery
Your FLO TV™ Personal Television should be shipped with a partially charged battery.
A low battery notification can be manually dismissed, but you will want to connect the FLO
TV™ Personal Television to a power charger to continue watching the FLO TV service.
TO CHARGE THE BATTERY
Provide power to the FLO TV™ Personal Television using one of the following methods:
1. Connect directly to a power outlet using the adapter.
2. Connect to a powered-on PC using the USB cable.
Once connected, the battery indicator LEDs light up one after another until the battery is fully
charged. After disconnecting the charger, the LEDs remain lit for 5 seconds, indicating the
power level, and then turn off.
You can safely recharge the battery at any time, even if it has a partial charge.