Filter
Top Products
2.
The radio transmits an emergency message until an Emergency
Channel Assignment is received.
3.
Upon receipt, the radio begins operation on the programmed Sys-
tem/Group (see the
Home/Emergency Key Definitions section
above).
4.
Press the PTT bar and speak directly into the microphone in a normal
voice.
5.
Release the PTT bar when the transmission is complete and listen for
a reply.
HOME
The radio can be programmed to automatically switch to a home
System and/or Group by pressing and holding the Home/Emergency key for
the programmed duration. The radio will also transmit an emergency mes-
sage on the home System and/or Group if programmed (see the EMER-
GENCY OPERATION section).
KEYPAD LOCK (SYSTEM Model Only)
The keypad can be locked at any time to prevent undesired key
presses. To lock the keypad when it is in the unlocked state, press and
release the
LOCK (shifted 0) key. All buttons and keys except the VOLUME,
PTT, HOME/EMER, SHIFT/CLR and
LOCK (shifted 0) will now be inhibited.
If the Emergency function of the HOME/EMER key is disabled, the
HOME/EMER key will also be inhibited. If the key is programmed for
Emergency or Emergency/Home, then the key is not inhibited and an
emergency can still be declared on the Home System/Group or the current
System/Group (however programmed).
39